Avo ER Milling Chuck Set
ER milling chuck set dia avo lenta ny collet chuck set, ny collet dia feno lohataona, mba hahafahan'izy ireo mifikitra amin'ny habe maro.Ity chuck set ity dia tonga lafatra amin'ny fampiasana milina fikosoham-bary sy milina hafa.
| Order No. | Haben'ny lavaka | PCS / SET | |
| santimetatra | mm | ||
| ER16-8 in (mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6in (mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10 in (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6 in (mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12 in (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8 in (mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15 in (mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Kodin'ny Draw Bar
| Taper amin'ny collet chuck | Kofehy amin'ny bara fisaka | |
| R8 | 7/16＂-20UNF | |
| 7:24 30 | M12×1.75 | 1/2＂-13UNC |
| 7:24 40 | M16×2.0 | 5/8＂-11UNC |
| 7:24 50 | M24×3.0 | 1＂-8UNC |
| MS2 | M10×1.5 | 3/8＂-16UNC |
| MS3 | M12×1.75 | 1/2＂-13UNC |
| MS4 | M16×2.0 | 5/8＂-11UNC |
| MS5 | M20×2.5 | 3/4＂-10UNC |
| MS6 | M24×3.0 | 1 ＂ -8UNC |
Ampahafantaro azafady ny kofehy amin'ny tsipika fametahana collet chuck sy ny famaritana ny collets (metric na inch)
Ampahafantaro azafady ny halavan'ny shank mahitsy sy ny dia.
Faly izahay manome collets sy chucks amin'ny shank samy hafa sy ny habetsahana araka ny fepetra takiana.
